SKU:013067
Pentair 013067 IntelliPro3 VSF 1.5 HP Variable Speed & Flow Pool Pump with Touchscreen — Genuine OEM
Pentair 013067 IntelliPro3 VSF 1.5 HP Variable Speed & Flow Pool Pump with Touchscreen — Genuine OEM
Share
In stock
Couldn't load pickup availability
- Low Prices
- Guaranteed Fitment
- Order Tracking
Share
The Pentair 013067 IntelliPro3 VSF 1.5 HP is a genuine OEM variable speed and flow pool pump with a built-in touchscreen control panel. It uses sensorless flow control to maintain a steady, user-set flow rate automatically, without a separate flow sensor, while cutting energy use versus a single-speed pump.
Key Features
- Genuine Pentair OEM: factory-built IntelliPro3 VSF pump, not an aftermarket equivalent.
- Built-in touchscreen: program schedules, speeds and flow targets directly at the pump — no separate controller required for basic operation.
- Sensorless flow control: the pump continuously adjusts speed to hold your target flow rate as pool conditions change.
- Up to 90% energy savings: compared to a traditional single-speed pump, by running at lower speeds for routine filtration.
- DOE-compliant: meets current U.S. Department of Energy efficiency standards for pool pumps.
- New motor, drive and hydraulics: redesigned components over earlier IntelliFlo generations for quieter, more efficient operation.
Specifications
- Part Number: 013067
- Series: IntelliPro3 VSF (Sta-Rite branded trade pump)
- Horsepower: 1.5 THP
- WEF Rating: 9.4
- Voltage: 115V / 208-230V, dual voltage
- Frequency: 50/60 Hz
- Control: Built-in touchscreen
- Plumbing Ports: 1.5 in or 2 in NPT
- Approximate Weight: 48 lb
- Brand: Pentair / Sta-Rite (Genuine OEM)
Frequently Asked Questions
Does this pump include an I/O relay board?
No. The 013067 includes the touchscreen but not the I/O relay board used to control other pool equipment. If you need that capability, the 013068 configuration adds the I/O board.
Is this the same pump as the IntelliFlo3 VSF?
It's built on the same VSF platform. IntelliPro3 is Pentair's trade-branded (Sta-Rite) version sold through pool professionals, while IntelliFlo3 is the retail-branded equivalent — the pump hydraulics and drive are the same series.
Does it need a separate flow sensor?
No. The pump's sensorless flow control calculates flow from motor load and speed, so no external flow sensor is required to hold a target flow rate.
Can this pump connect to automation?
Yes, it can integrate with compatible Pentair automation systems. Confirm your automation platform and firmware version with us before ordering if you need guaranteed compatibility.
Who should install it?
A qualified pool professional or licensed electrician. The pump must be correctly bonded, grounded, and wired per local electrical code, with power isolated at the breaker during installation.
Frequently asked questions
What is the part number for this pump?
Pentair lists this pump under part number 013067. Quote 013067 when you cross-reference it against your equipment manual, an existing part, or a parts diagram, so you are comparing the same revision.
How do I confirm this fits my equipment?
Match the part number on the pump you are replacing, or review your existing plumbing port size and electrical configuration. If your model or serial number is not named on this page, send it to us before you order and we will confirm the fit.
Does pump installation need an electrician?
Pool equipment sits under specific electrical code requirements covering bonding, grounding and GFCI protection. Cut power at the breaker before any wiring work, and have a licensed professional handle the electrical connections.
Is there a warranty on this pump?
It carries the standard Pentair manufacturer warranty. The terms are set by Pentair, and on some equipment the coverage only applies when a licensed professional performs the installation. Keep the receipt and packaging until you have confirmed correct operation.
California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.
We Accept
NEED HELP FINDING THE RIGHT PART?
Finding the correct replacement doesn't have to be a guessing game. Send us your equipment's brand, model number, part number, or a photo of the equipment label, and our team can help identify the correct replacement.
Prefer to email us? Contact our team at sales@poolsupplyharbor.com.
-
Fast US Delivery
Fast delivery on all US orders
-
Secure Payment
We accept Visa, American Express, PayPal, MasterCard, and Discover.
-
1-Year Warranty
Our products are covered for one year against manufacturing defects.
-
Support 24/7
Contact us 24 hours a day, 7 days a week. Email us anytime for support.