Pentair 013068 IntelliPro3 VSF 1.5 HP Variable Speed & Flow Pool Pump with Touchscreen and I/O Board — Genuine OEM

The Pentair 013068 IntelliPro3 VSF 1.5 HP is a genuine OEM variable speed and flow pool pump that combines the built-in touchscreen control panel with an I/O relay board, so the pump can directly control other compatible pool equipment such as valves, lights or a secondary pump without a separate automation system.

Key Features

• Genuine Pentair OEM: factory-built IntelliPro3 VSF pump, not an aftermarket equivalent.
• Built-in touchscreen: program schedules, speeds and flow targets directly at the pump.
• I/O relay board included: lets the pump trigger other compatible equipment directly, extending basic automation beyond the pump itself.
• Sensorless flow control: the pump continuously adjusts speed to hold your target flow rate as pool conditions change.
• Up to 90% energy savings: compared to a traditional single-speed pump, by running at lower speeds for routine filtration.
• DOE-compliant: meets current U.S. Department of Energy efficiency standards for pool pumps.
• New motor, drive and hydraulics: redesigned components over earlier IntelliFlo generations for quieter, more efficient operation.

Specifications

• Part Number: 013068
• Series: IntelliPro3 VSF (Sta-Rite branded trade pump)
• Horsepower: 1.5 THP
• WEF Rating: 9.4
• Voltage: 115V / 208-230V, dual voltage
• Frequency: 50/60 Hz
• Control: Built-in touchscreen with I/O relay board
• Plumbing Ports: 1.5 in or 2 in NPT
• Approximate Weight: 48 lb
• Brand: Pentair / Sta-Rite (Genuine OEM)

Frequently Asked Questions

What does the I/O board add over the 013067?

The I/O relay board lets this pump directly control other compatible pool equipment — such as a valve actuator, light or second pump — without routing that control through a separate automation load center. The 013067 has the touchscreen only, without this board.

Is this the same pump as the IntelliFlo3 VSF?

It's built on the same VSF platform. IntelliPro3 is Pentair's trade-branded (Sta-Rite) version sold through pool professionals, while IntelliFlo3 is the retail-branded equivalent — the pump hydraulics and drive are the same series.

Does it need a separate flow sensor?

No. The pump's sensorless flow control calculates flow from motor load and speed, so no external flow sensor is required to hold a target flow rate.

Can this pump replace a 013067 or 013066?

It's part of the same 1.5 HP IntelliPro3 VSF family but with a different control configuration. Match your equipment needs — touchscreen only, I/O board only, or both — against the specific part number before ordering.

Who should install it?

A qualified pool professional or licensed electrician. The pump must be correctly bonded, grounded, and wired per local electrical code, with power isolated at the breaker during installation.

California Proposition 65 Warning: This product can expose you to chemicals known to the State of California to cause cancer and reproductive harm. For more information go to www.P65Warnings.ca.gov.